-
After the hot water plate heat exchanger should be met.
而经过板式换热器的热水应满足。
-
Products through the plate heat exchanger for re-heating cycle.
产品通过板式热交换器循环进行再加热。
-
Thereby, a very compact plate heat exchanger (1) can be obtained.
这样可以得到一个非常紧凑的板式热交换器(1)。
-
Plate heat exchanger of sealing gasket slip off the gasket groove.
板式换热器的密封垫片滑离了垫片槽。
-
Design and heat transfer characteristic of new plate heat exchanger.
新板型板式换热器的研究。
板式热交换器(heat-exchangers of the plate type,plate heat exchanger,plate type heat exchanger) 系由部压成形之凹凸不锈钢板组成,两相板片之山形凹凸纹路成180度相反组合,因此板式热交换器两板片之间凹凸脊线形成交错之接触点,待接触点以真空焊接结合后,便构成板式热交换器耐高压之交错流道体系,这些交错的流道系统便是使板式热交换器之流体产生强烈紊流而达到高热传效果之原因。