The oxidation state reforming catalyst should be dried and reduced before application.

氧化态的重整催化剂使用前要经过于燥和还原等步骤。

The industrial application results of CN-20 reforming catalyst in more than ten years are described.

介绍了CN - 2 0型催化剂十余年来的工业应用结果。

CB-7 is a new generation reforming catalyst developed by RIPP and Changling Refinery in recent years.

7是石油化工科学研究院和长岭炼油化工厂近年开发的新一代重整催化剂。

The operation and regeneration'of platinum-rhenium reforming catalyst, PRT-A and PRT-B, in commercial application was introduced.

介绍了PRT-A和PRT-B铂铼重整催化剂的长周期工业运行与再生情况。

The said process has effectively raised octane number of the coker gasoline and prolonged service life of the reforming catalyst.

该法可有效提高焦化汽油的辛烷值，延长重整催化剂的使用寿命。

The kinetics of cyclohexane dehydrogenation on platinum reforming catalyst was studied in a flow-circulating system at ordinary pressure.

在流动循环装置中常压下进行了环已烷在铂重整催化剂上的脱氢反应动力学研究。

Summarizes the first industrial application of hydrocarbon steam reforming catalyst QZ201/QZ202 used in Puyang Fertilizer Plant in Henan.

对QZ2 0 1/QZ2 0 2二段烃类蒸汽转化催化剂在河南濮阳县化肥厂的首次工业应用进行了总结。

A new regeneration process for continuous catalytic reforming catalyst is introduced which focuses on modification of coke combustion process.

介绍了一种连续重整催化剂再生新方法，该方法侧重于再生烧炭过程的改进。

The self-developed light oil reforming catalyst has well performed in hydrogen production and has substituted the import ones completely at home.

轻油制氢催化剂作为国内性能优良的转化催化剂，已全部替代了进口催化剂。

But a high price has to be paid for natural gas-steam reduction of the reforming catalyst after it has been poisoned to a certain degree by sulfur.

在转化催化剂受到一定程度的硫中毒后，再进行天然气-水蒸汽。

The advanced second generation patented ultra-low pressure continuous reforming process of UOP and the R-134 reforming catalyst were used in the unit.

该装置采用美国UOP公司先进成熟的第二代超低压连续重整工艺专利技术及r - 134重整催化剂。

The hydrocarbon reforming catalyst has excellent catalytic activity and thermal conductivity, and thus can easily transfer heat required in a hydrocarbon reforming reaction.

所述烃重整催化剂具有优异的催化活性和热导率，因 而能够容易地传递烃重整反应中所需要的热。

In recent years, the irregular shape methane steam reforming catalyst development progresses rapidly with the goal to increase catalyst effectiveness and reduce the pressure drop in fixed bed reactor.

近年来，甲烷蒸汽转化催化剂异形化研究取得了很大进展，其主要目的是提高催化剂的效率因子，降低固定床反应器中的压降。

In the reforming operation a light hydrocarbon feed isomerizes on contact with a suitable catalyst to produce gasoline with a higher octane number.

在重整操作中，一个轻质烃类进料与一个合适的催化剂接触而异构化得到具有高辛烷值的汽油。

Catalyst for promoting rearrangement of hydrocarbon molecules in a gasoline boiling-range feedstock to form desired product in catalytic reforming process.

促进汽油沸程原料烃类分子重排以生成催化重整过程所要求产物所用的催化剂。

Online monitoring system for fan on catalyst reforming unit.

催化重整装置风机在线监测系统。

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalyst were extensively investigated by TPSR, TPD and pulse reaction experiments.

采用TPSR、TPD和脉冲反应等方法对担载型镍基催化剂上甲烷二氧化碳重整反应过程中二者的吸附和解离行为进行了详尽的研究。

A hydrocracking catalyst named 3825 was developed to produce heavy naphtha for reforming feedstock from vacuum gas oil. This catalyst also has the flexibility to produce naphtha with jet fuels.

本文介绍了一种以减压馏分油为原料生产重整原料(重石脑油)为主并具有生产喷气燃料灵活性的轻油型3825加氢裂化催化剂。

The catalyst systems, such as copper system and noble metal system, for hydrogen production by methanol steam reforming are especially discussed.

重点讨论了甲醇水蒸气重整制氢催化剂体系：铜系催化剂和贵金属系催化剂。

In this paper, some typical reactor designs, process engineering, operation conditions, catalyst, reaction mechanism, and thermal analysis of catalytic steam reforming of bio-oil are presented.

本文介绍了生物油水蒸气催化重整反应机理与热力学分析，介绍了催化重整制氢过程催化剂、制氢工艺条件、代表性的反应器及工艺流程。