-
The rigid cover plate is provided with two grout holes.
刚性盖板设置两个灌浆孔。
-
Reattach cover plate to make an air and water tight seal.
重新固定盖板,并紧密密封防止空气和水通过。
-
The handle of cover plate is adopted as retractable handle.
盖板把手改为可折叠式。
-
The injection mould for a duplicator cover plate is designed.
设计了复印机盖板的注塑模具。
-
Remove all nuts and bolts from cover plate and take off plate.
从盖板上拆卸所有螺母和螺栓,然后将盖板拿开。